Titanium Tube

Product Detail

1. product brief introduction

     Our titanium pipe includes tube blank and the production tube. According to the material, it can be divided into pure titanium pipe and titanium alloy pipe. According to the machining process, it can be divided into seamless tube, and welded tube. Tube billet is hot extrusion tube, as the raw materials for production of the finished tube, also can be used in the production of vacuum coating tube target (pure titanium). Pure titanium pipe can be used in the production of titanium coil pipe, such as heat transfer pipe, heating pipe and condenser pipe in heat exchanger. The most commonly used alloy pipe is TC4 tube, strength is higher than the pure titanium, more resistant to corrosion, mainly used in oilfield and ships, also used in the production of various kinds of machining parts. When you need higher strength, can use TC11 to replace TC4. TA18 (3Al-2.5-V) (good corrosion resistance and high strength) is often used to machining titanium alloy bicycle frame; Welded pipe is generally used in power plant water treatment equipment and desalination systems.

2. The product specification

Tube blank: 89*6mm, 70*7mm, 45*3mm?

Production tube: (70-89)*6mm, (40-70)*7mm, (20-45)*3mm?

The above are commonly used specifications, specific specifications can also be customized according to customer request.

3. The material

TA1(Grade 1)?TA2(Grade 2)

TA9(Grade 7)?TA10(Grade 12)?TA18

TC4(Grade 5)?TC6?TC11 

4. Performance standards

Chemical composition meet the ASTM_B_338-2010 standard and other standard you required.

5. Standard of properties

Reference standard of Chemical composition

Grade	Al	V	N.max	C.max	H.max	Fe.max	O.max	Residuals(ea) max	Residuals(total) max
Gr1			0.03	0.08	0.015	0.20	0.18	0.1	0.40
Gr2			0.03	0.08	0.015	0.30	0.25	0.1	0.40
Gr5	5.5-6.75	3.5-4.5	0.05	0.08	0.015	0.40	0.20	0.1	0.40

 Reference standard of mechanical property

Grade	room-temperature mechanical properties, not less than
	Yield strength	Ultimate Strength	Elongation in 50 mm, A5	Reduction in Area
Grade1	170 MPa	240 MPa	25%	30%
Grade2	275 MPa	345   MPa	20%	30%
Grade5	825   MPa	895   MPa	10%	20%

Pipe size deviation

Pipe diameter and wall thickness deviation should be allowed to meet,




OD	Permissible Variations in OD	Wall thickness allowable deviation
6~25	±0.10	±10%
>25~38	±0.13
>38~50	±0.15
>50~60	±0.18
>60~80	±0.25

The tube bending

OD/mm	bending /(mm/m), not more than
=30	2
>30~80	3

6. Our advantages

a. More 10 years experience, we are the factory.
b. Factory direct sales with competitive price.
c. Sophisticated technology, excellent quality.